Introduction

OC5B oxygen concentrator consisted of air compressor, adsorption tower of molecular sieve, oxygen sensor and quadric meter uses the molecular sieve as the absorbent, adopts pressure swing absorbers (PSA) to directly concentrate the medical oxygen with high concentration from the air. And it is a small and portable oxygen concentrator.

The machine takes the advantages of small in volume, light in weight, convenient in moving (as it has turning truckle), stable in performance, high in safety, easy in operating, low in noise, safe in working, which complies with requirements of medical device.

This medical oxygen concentrator can provide Oxygen , Spo2 and pulse rate to hypoxic patients in communities, medical institutions(exclude ICU) and family.

Function

1)With turning truckle, easy to move

2)Built-in filter to sieve the impurity

3)Oxygen concentration status indicator

4)Function of accumulating time

5)Function of timing shutdown

6)Alarm for power failure

7)Alarm for high/low pressure protection

8)Alarm for low flowrate

9)Measure SpO2 and pulse rate

10)With working indicator

Performance

1.Maximum recommended flowrate: 5L/min

2.Oxygen Output Concentration Levels: (reach the stated oxygen concentration level after turning on the machine for thirty minutes): it’s 93%±3% when the flowrate is 0.5~5L/min

3.Flowrate range: 0.5~5L/min

4.Change in maximum recommended flow when back pressure of 7kPa is applied<0.5L/min

5.Outlet pressure: 20kPa~50kPa

6.Average Power Consumption: 400VA

7.Electrical Requirements: AC220V±10%    50Hz±1Hz

8.Pressure Relief Mechanism Operational at: 250kPa±50kPa

9.Sound Level: ≤55dB(A)

SpO2 Measurement

1)  Range: 35%~100%

2)  Accuracy: When SpO2 is 75%~100%, the error is ±2% ; no definition when SpO2 is less than 70%.

Pulse rate Measurement

1) Range: 25bpm~250bpm

2) Accuracy: 1%±1bpm

Safety categories

1) Anti-electroshock type: class Ⅱ equipment

2) The degree of protection against electroshock: Type BF applied part

3) The degree of protection against ingress of water: IP21

Accessories

A humidifier bottle

An user manaul

A power cord

A nasal oxygen cannula

A SpO2 probe

Physical characteristic

Dimension: 508mm(L) × 260mm(W) × 530mm(H)

Weigh: 21Kg

Environment

a) Temperature: 10℃~40℃

b) Relative humidity: ≤80%

c) Atmospheric pressure: 860hPa~1060hPa